Solar Tunnel Drier KSD 1000 - Click here for Brochure
ease of transportability throughout the globe and great economy in the cost of construction. All
the equipment will be enclosed within the container and will be shipped to the location from the
factory and will be then taken out and assembled on site. The overhang of the solar panels can
be utilized as an additional shelter on site.
| DESCRIPTION OF DRIER |
| Casing (Drying chamber) : The drying chamber is made of double walled fabricated casing with 50 mm PUF insulation. Inner wall of casing is made of SS 304 and outer wall with M.S. painted finish. |
| Size of chamber : 6000 L x 2400 W x 2400 H |
| Trays : Perforated SS 304 sheets or SS wire mesh – size 600 x 900 x 25 |
| Heating : Hot water from solar calorifier tank is circulated inside the chamber into two heat exchangers made of SS 304 finned tubes. The water from the calorifier tank will also be heated by LPG as a back up arrangement. |
| Air Circulation : Four Axial flow fans of 6000 cfm/hr capacity provides the air circulation inside the chamber. The fans are reversible in direction and are made of fiberglass cast Aluminium impellers driven by 2 HP ,class H insulated Three Phase motors. Fans rotation will be reversed periodically to change airflow through the trays. |
| Inlet and Outlet air dampers : Motorized dampers actuated manually or automatically by sensing the humidity inside the chamber. |
| Humidity and Temperature sensors : Installed inside the chamber and connected to automatic climate controller to actuate the fans, dampers and hot water pumps. The automatic temperature climate controller is optional and the operation can be manual also. |
| Inlet air quality : The air can be de-humidified by regenerative type dehumidifiers to supply dry air into the chamber. The efficiency of the drier will be enhanced by the dehumidifier. In humid atmospheres, the dehumidifier will be ideally suited to improve the efficiency of the drier. |
| SPECIFICATION OF KSD50 TUNNEL DRIER | ||
| 1 | Size of the chamber | Length - 6000 mm, Width - 2400 mm, Height - 2400 mm |
| 2 | Maximum temperature | 70 deg. C |
| 3 | Heating | Hot water generated from solar collectors circulated into the casing through heat exchangers. Back LPG/ Bio gas heaters provided. |
| 4 | Blowers | 4Nos of 2 HP each |
| 5 | Power Supply | 240V Single Phase / 440 V 3 Phase. |
| 6 | Number of trolleys | 12 Nos. |
| 7 | Charge Per Tray | 3 Kg to 4 Kg. |
| 8 | Tray material | SS 304 |
| 9 | Tray size | 600 x 900 x 25 |
10 |
Solar Collectors |
400 Vaccum tubes of 47 x 1400 mm arranged in 12 collectors. |
11 |
Gas Backup | 6 Nos of YellowStone Gas geysers connected to calorifier tank by a 0.5 HP pump |
12 |
Control Panel | Controls for hot water circulation pump, back up gas geysers, Humidity controls for exhaust fans. |
For current price please and other enquires please email [email protected]
